# How many bags of cement fit in a square meter of subfloor?

Article by: Iker Fierro | Last update: April 10, 2022
Score: 4.4/5
(5 ratings)

3 Bags of 50kg of Cement per Square Meter.

## How many bags of cement do I need to make subfloor?

dosage used

For the preparation of subfloors, it is very common to use cement, hydraulic lime, medium sand and crushed rubble in a dosage of 1/3:1:3:4, that is, 1/3 volume of cement, 1 volume of lime, 3 volumes of sand. medium and 4 crushed rubble.

## How many bags of cement per square meter of floor?

If the base is very firm, you can consider 0.8 packages of cement for each m2 with a thickness of 10 cm, that is, 16 packages plus another for finishing. If it is very loose or moist soil, it is 1 bundle per m2 x 10 cm thick, which will give you an amount of 20 bundles plus another for finishing.

## How much does a bag of cement yield per square meter?

The thickness of the cement is 8 centimeters and a package is enough for 1.20 meters. Depending on the thickness you need. For a 10 cm thick surface, 8 to 10 bundles, depending on the type of finish. With a thickness of 7 cm, 5 to 8 bundles are needed on a hard or compacted surface.

## How to calculate the amount of cement per square meter?

To know the amount of materials you must multiply the area 6×5=30 m2 and then multiply by the thickness of the radier, in the case that it were 10 cm it would be like this: 30 m2 x 0.1 mt = 3 m3. In 1 m3 of radier, 6 bags of cement are used, therefore you multiply 6 sc x 3 m3 = 18 bags of cement.

16 related questions found

### How many bags of cement of 25 kilos per m2?

275 / 25 = 11 current 25 kg bags of cement.

### How do I know how many bags of cement I need?

Thus, the actual volume of concrete for 1 cubic meter of compacted construction concrete will be = 1 -0.02 = 0.98 m3. Therefore, the amount of cement needed for 1 cubic meter of concrete will be = 0.98/0.1345 = 7.29 bags of cement.

### What is the proportion to make a subfloor?

It usually contains cement, coarse aggregate (crushed brick shell or rubble), fine aggregate (sand), and water. Dosage: (1:1/8:4:3). Currently, masonry cement, coarse aggregate, sand and water are used.

### How much material do I need to make a subfloor?

To begin with, let’s remember the dosages to make an excellent subfloor: ➡ If we do it with cement, lime, rubble and sand, the dosage will be: ½ bucket of cement, 1 ½ of hydraulic lime, 6 buckets of clean rubble and 4 of sand, but 8 demolition debris and 2 sand.

### What is needed to make a subfloor?

Before you build a subfloor, you have to prepare the soil with which it will make contact. This must be clean of roots and organic elements, as well as well leveled. To achieve them, the upper layer of the soil must be removed with manual tools if the surface is not large or with heavy machinery if it is large.

### What is the thickness of a subfloor?

If the subfloor is not directly in contact with the surface, its thickness can be less than 12cm, otherwise, the thickness will vary between 12 and 14 centimeters, keep in mind that the closest to the ground is equivalent to a greater thickness.

### How much does Styrofoam for subfloor yield?

Yield: A bag of beads and/or granules for lightened concrete yields approximately 5 m2 at a thickness of 5 cm. Using these proportions, a concrete with a specific weight of the order of 450 to 500 kg/m3 is obtained.

### How much material do I need to make a 3×3 floor?

Calculation of selected material for the floor firm

3×3=9 m2 x 0.05 m = 0.45 m3+5% waste= 0.4725 m3 of concrete volume.

### How much cement yields 25 kilos?

Each bag of concrete yields 12 liters, which is equivalent to 0.012 cubic meters (m3), if you want to build a Radier of 3 x 5 meters, and with a recommended thickness of 8 cm, for example for a terrace, you must multiply the width by the length by the thickness, that is, 3X5X0.08= 1.2 m3.

### How is the amount of concrete calculated?

How to calculate cubic meters of concrete

The correct way to calculate the cubic meters to be used in the casting of concrete in an empty surface is: WIDTH x LENGTH x DEPTH. For example: If the casting of the plate or surface is: WIDTH: 6 MTS. … DEPTH: 0.40 MTS.

### How much does a bag of cement yield in a 10 cm slab?

For a 10cm thick slab, 1 package per m2 is required. In your case you need 24 packages of cement.

### How much sand and cement per square meter?

Standard proportions are: 1 part cement. 4 parts of sand. 1 part water.

### How much material do I need to make a 3×2 floor?

It is according to the resistance of the concrete that you need. For pavements and floors, f’c= 150 kg/cm2 is recommended. Is it useful to you? There are tables that tell you how many cans of gravel, sand and water you need per lump of cement. For your case you require 5 packages of cement, you would make a firm 10 cm thick.

### How to make a lightened subfloor?

Until now, ground styrofoam was used to lighten the subfloor, mixed with sand, cement and water. A traditional execution but that continued with the same work times as with a traditional subfloor.

### How is lightweight cement made?

The relieved concrete or light concrete is obtained with the mixture of cement, sand, water and expanded polystyrene (EPS) either in the form of granules, or ground recycled EPS. Additives are often used to facilitate mixing.

### How much does 1 cubic meter of Styrofoam weigh?

Styrofoam Sheet 1×1 Mts. X 2 cm. Thickness – 12 Kg/m3.

### How is the cement floor mix prepared?

Concrete is made from a mixture of 3/4 parts sand and crushed stone and 1/4 part water and cement. (75% sand and crushed stone and 25% cement and water). Take into account that before making any mixture you will need to know the resistance (f’c) of the concrete per square centimeter.

### What is subfloor and binder?

The monolithic underlayment-carpet is a controlled density mortar specifically designed to serve as leveling and seating for floors when the thickness to be filled ranges between 3 and 8 cm. This material can be applied both indoors and outdoors and with slopes.

Stay tuned to Techlyfire for more how to related articles.