What process should be followed to diagnose electrical systems with electronic control?

Article by: Jose Vera | Last update: April 2, 2022
Rating: 4.4/5
(28 ratings)

THE DIAGNOSTIC PROCESS

    Verify Complaint.Analyze Symptoms.Correct Problem.Determine Related Symptoms.Isolate Problem.Verify Proper Operation.

How is an electrical diagnosis done?

A complete diagnosis of the electrical system must include electrical measurements with specialized equipment for power quality analysis, thermographic analysis, review of the grounding system and a thorough inspection of the installation by a specialist engineer.

What is electronic diagnosis?

The diagnosis of heavy vehicles contemplates virtual platforms which allow obtaining vehicle information and being one step ahead, identifying active faults and reliably avoiding unnecessary disassembly.

What Does an Electronic Diagnostic Technician Do?

Electronic technicians help specialists in the research, design, development, maintenance or repair of electronic products, such as televisions, cell phones and computers, etc. … For example, they can test televisions for electronic performance and reliability before they go into full production.

What process would you recommend for diagnosing the engine prior to repair?

Aspects such as the state of the spark plugs, how the engine is generating combustion, cylinder compression measurement, gaskets in good condition that are not leaking oil, among other checks, must be reviewed to have an accurate diagnosis of the state of the engine.

41 related questions found

How to diagnose an engine?

Performing an engine diagnostic is initiated by connecting a device to the vehicle’s on-board computer. The device interfaces with the computer and sends a diagnostic code that can reference a compilation of possible problems for that manufacturer’s vehicles.

How to diagnose a car engine?

5 tips to detect faults in your vehicle’s engine

Warning systems of your vehicle. … Unusual explosions. … Screeching on power up. … Vibrations or knocking in the gearbox. … Smoke and strange smells.

What is the function of an electronic?

Electronics currently performs a wide variety of tasks. The main uses of electronic circuits are the control, processing, distribution of information, conversion and distribution of electrical energy.

What does an Industrial Electronics Technician do?

The technical professional in Industrial Electronics will be trained to execute tasks and operations in electronic systems applied to the areas of maintenance and control of machines and industrial processes that make use of electrical and electronic technology (analog, digital and power).

What is an Industrial Electronics Technician?

University Technician who works in industry and commerce, where electronics are used in processes in general. At present, in all the processes there is an electronic component in the machinery and equipment, for this reason they are people with a wide work potential at a general level.

What are the types of automotive diagnostics?

We have two types of automotive diagnoses, by computer and general of the car. The diagnosis by computer, or scanner, has the purpose of detecting the failure of a car that has a light on.

What instruments are used today for the electrical and electronic diagnosis of vehicles?

An automotive scanner is a tool used to diagnose the electronic faults of a car, specifically those stored in the car’s computer. The latter is responsible for regulating the functions of the engine through different sensors and records all errors with a code.

What is an automotive diagnostic sheet?

This form is designed as an aid in recording vehicle reference information (make, model, mileage, etc.) and preliminary diagnostic information (symptoms) of the vehicle prior to retrieving codes.

How are electrical problems diagnosed?

Touch the tip of the red positive battery terminal with the red multimeter probe. Touch the tip of the black negative terminal with the black probe. With the engine off, the multimeter should read 12.5 to 12.8 volts. A lower reading indicates that the battery is discharged and needs to be recharged.

How to diagnose electrical faults at home?

Some indications that there are problems in the electrical installation may be the following:

Household lights are continuously dim or flickering, or your television picture is reduced in size. Evidence of sparks in electrical wiring. Sparking or buzzing sounds from electrical wiring.

How to solve the problem of electric light?

How to detect and solve electrical problems at home

If you don’t know, don’t touch. Determine if the problem is internal or external. Before operating, make sure you’ve turned off the power to the house.

What subjects does Industrial electronics take?

Industrial Electronics Subjects

    Electrical installations.Electronic circuits.Digital circuits.Programmable logic controllers.Industrial process control instruments.Mechatronics.Electrohydraulics and Electropneumatics.Applied robotics.

How much do electronics technicians get paid?

The average electronic technician salary in Argentina is $300,000 a year or $154 an hour. Entry-level positions start at an income of $96,000 a year, while more experienced professionals earn up to $600,000 a year.

What does an electronics technician do?

The electronics technician is the person who gives corrective maintenance to electronic equipment, changing components or control cards that have faults.

How to know if a car engine is bad?

What are the first symptoms of a failed engine?

Warning lights. It’s erratic. The car should move smoothly, without being jerky, jerking, hesitating or suddenly accelerating, when it happens it’s because there’s a big problem brewing. … Explosions, knocks, vibrates. … Unusual smells. … Smoke. Leaks. … Plugs. … Filters.

What tests are performed to diagnose a combustion engine?

Engine Diagnostics – Compression Test

    It expels smoke of any color. It is necessary to accelerate more than normal to move (lack of power). High fuel consumption. The idle revolutions are very variable.

What are the failures of an engine?

Discover the 10 most common failures in an engine

Loose or missing gas cap. … Spark plug worn. … Clogged radiator. … Loss of coolant. …Low compression. … Faulty or broken oxygen sensor. …Spark strike. … Dirty oil.

How to make a diagnosis with automotive scanner?

Six steps to diagnose with an automotive scanner Featured

The scanners are self-powered and retrieve codes automatically. … find link connection diagnostic data on your vehicle. … Connect automotive scanner for diagnostic data connection.

What are automotive electrical diagnostic equipment?

Tools used in auto mechanics

    Scanner. The Scanner is an automotive diagnostic tool that allows the user to interact with the different processors or computers that the vehicle has. … Oscilloscope. … Multimeter. … Compressometer. … Injector test bench.

How long is the industrial electronics career?

You will be able to work with industrial and electronic equipment, among other equipment for domestic and professional use, such as computers or medical equipment. The technical career in Electronics lasts 3 years or six academic semesters.

Stay tuned to Techlyfire for more faq’s related guides.

Leave a Comment