What type of electrode is the 6013?

Article by: Ing. Juan José Esteban Segundo | Last update: April 10, 2022
Rating: 4.9/5
(55 ratings)

E 6013. Rutile coating electrode that presents a stable arc that is very easy to start and restart. Medium penetration with very good looking convex laces. low spatter and self-removing slag.

What does the number 6013 on an electrode mean?

The first two digits are the tensile strength, measured in pounds per square inch per 1,000. For example, an E6013 electrode will withstand a tensile strength of 60,000 PSI and a 7018 has a high tensile strength of 70,000 PSI.

What can be welded with electrode 6013?

Welding 6013

    Description. Electrodes for welding carbon steels. … Applications. It is used for welding carbon steels with tensile strength up to 60,000 psi. … Energy. It works with direct current, both polarities or with alternating current even with open circle low voltage equipment.

When to use electrode 6013?

In the event that the weld joints do not have to withstand great stress, rutile electrodes (6013) may be used. These are widely used in ironwork such as the manufacture of doors, stairs, bars, etc.

What does 6011 mean on the electrodes?

WeldingArc 6011 is a cellulose-based, potassium-containing facing electrode that meets the requirements of classification E6011, AWS A5 standards. 1 and is used for welding carbon steels with tensile strength up to 60,000 psi.

27 related questions found

What is the difference between 6011 and 6013 electrodes?

The 6013 electrode is suitable for light to moderate penetration into thin metal. The 6011 electrode offers more penetration than the 6013 for welding slightly thicker material.

What is the difference between 6011 and 6010 solder?

E-6011: the main difference between this electrode and the previous one lies in the composition of its coating, since it is potassium cellulose, it uses both alternating current and direct current, positive polarity.

What is the amperage for welding with electrode 6013?

In the case of the manufacturer CONARCO (ESAB), for the electrode 6013 blue tip of 2.5mm, between 60 and 85 amps are suggested.

What amperage to use for electrode 6013?

In the case of the E6013, the company identifies it as “CONARCO 13A”.

How long does an inch of 6013 solder hold?

The first two digits are the tensile strength, measured in pounds per square inch per 1,000. For example, an E6013 electrode will withstand a tensile strength of 60,000 PSI and a 7018 has a high tensile strength of 70,000 PSI.

What materials can be welded with an electrode?

metals that can be welded

    Steels.Stainless steels.Aluminum and its alloys.Nickel and its alloys.Copper and its alloys.Titanium and its alloys.Cast iron. … Metals with high electrical resistance and low electrical conductivity.

What is welded with electrode 7016?

BASIC ELECTRODE E-7016

They are electrodes with excellent weldability due to their double coating, even in alternating current. It has a very stable arc, being ideal for root passes and welding in position. Its applications are for all kinds of metal constructions and maintenance, its use is universal.

How are the electrodes read?

To identify the electrodes, an international code has been created, under the AWS-ASTM regulations, which consists of a series of figures or digits, placed in visible places on the boxes and on the electrodes themselves with the following digits: E -XX- X- X, where: E: welding electrode.

What does the last digit of an electrode mean?

Z, the last digit, which is closely related to the previous one, is indicative of the type of electric current and polarity in which the electrode works best, and in turn identifies the type of coating, which is qualified according to the highest percentage of raw material contained in the coating.

What do the colors of the electrodes mean?

The group color indicates the table in which the primary characteristics should be searched. Colors A and B determine the specific type according to AWS code A5. 1-69 that we will see later.

What amperage to use for each electrode?

To carry out work on thin sheets of 2, 1.5 or 1 mm, we can use 1.5 mm or 2 mm electrodes, regulating the machine between 35 and 50 amps. For joining round or rectangular pipes of 1.2, 1.6 or 2 mm, we can use electrodes of 1.5, 2mm or 2.5 mm, regulating the machine between 40 and 65 amps.

What is the amperage for welding?

from 400 to 600 amperes or amps: it is used for heavy work. It is generally used to weld structures, heavy parts of machinery, tanks, pipes, etc.

What amperage for 7018 3 32?

It has an amperage of between 70 and 120 amp. Its medium penetration allows welding surfaces between 1.5 and 3 mm thick.

What do the numbers 7018 6013 and 6011 mean on a weld?

The first two digits represent the minimum tensile strength resulting from the weld, measured in pounds per square inch (PSI).

What does e 6012 mean?

E6012 / E4312

– Electrode characterized by medium penetration, low sparkling and a dense slag that completely covers the weld bead. The deposited metal is generally higher in its yield strength than the deposit made with the same size E6010 or E6011 electrodes.

What does 7010 mean in welding?

Welding 7010 Brand WEST ARCO. It has a cellulosic coating, with iron powder. Produces a deposit with 0.5% molybdenum. It has high deposition rate and high penetration.

What does e 6010 mean?

Electrode with iron powder in the coating, which allows a higher deposition rate and easier application, together with outstanding mechanical properties. The stability of the arch and the protective shield provided by the coating help to direct the deposit reducing the tendency to undercut.

What is the difference between 6010 and 6013 electrode?

However, 6010 electrodes feature an extremely tight arc, which can make it difficult for novice welders to use. 6013 electrodes produce a smooth arc with minimal spatter, offer moderate penetration, and have easily removable slag.

Always Check Techlyfire for more faq’s related articles.

Leave a Comment